clone

Winx DVD Copy Pro Halloween discount for $9.95 by Digiarty

image So there are lots of DVD Rippers and Copy tools around, but getting a good one that will actually stay updated usually sets you back a small fortune. I just came across this great deal for Winx DVD Copy Pro by Digiarty for $9.95 as part of a massive Halloween sale. Yes, Halloween is over, but the spirit lives on!

If you go to the main Digiarty page you can see the Promotions menu which gives a good deal on the Winx DVD Ripper, but DVD Copy Pro isn’t on there. I actually found this on the page about their Blu Ray player. You can jump straight to it and pick up the full version which includes all planned updates. If you like, you can grab the Giveway copy which will certainly work for now, provided you install it quick enough, but it doesn’t come with any updates.

$10 is a heck of a deal for a DVD cloning tool. I’m not that familiar with Winx DVD Copy Pro, but I have used it in the past and it is supposed to be good with discs that are problematic to read or even scratched. I have one or two that fit into that category, and for $10, I can see how I can go wrong.

So if you’re looking for a deal head over to – http://www.winxdvd.com/giveaway/halloween.htm – and grab a copy. You can also add Ripper Platinum for $15 more. $25.95 for a complete ripping and converting solution is pretty good if you ask me.

Other articles of interest:

It’s time to clone and backup my drives

The only thing worse than a bad backup is no backup at all. Right now, I don’t have either. I talk a good game, but my system maintenance has been terrible. I haven’t been backing up the root drive on my main computer simply because it was too damn full. I have everything crammed onto one drive which means the backup would be a couple of gigs in size. Not only is that consuming way too much space, it’ll take too long to back it up and it will be impossible to restore. What’s the point of having a backup if it’s impossible to use?

I’ve finally gotten to a place where I can make reasonable backups of my root drive. I trimmed and pruned everything off that drive so that only 100GB remains which includes the pagefile and the hibernation file. The final step is to move both of those to another drive. Even though I’ve had multiple drives for a long time I never took the appropriate steps to farm out of all my data so that C:\ was as lean as possible. As I’ve written in other articles, I had movies, music, training videos and everything else all on the C:\ drive. This is an incredibly bad plan.

If you don’t already have one, I would seriously recommend getting a second drive for your system and moving as much as possible over to it. It’s a truly bad idea to have gigs worth of data stuffed into the My Documents folder on the system drive. It’s much better to dedicate C:\ to just the OS and put everything else on a true data drive. With that in mind, I’m now ready to start backing up my system the right way. It should only take about 30 minutes to complete and will be much easier to store. I’ve got O&O DiskImage at the ready to make an image of my C:\ drive. I don’t want to just back it up, I want an image. If the drive crashes, I can restore a working OS rather than installing an OS and then recovering files. In one step I can have a new OS up and running and all my files back where they’re supposed to be. Backups are good for data, but I want an image of the boot drive.

To get the ball rolling I tested DiskImage out on my work laptop. I I made an image of the machine while it was still running. The copy was saved to an external USB drive I brought in. It all seemed to go flawlessly. I don’t know if I could do a bare metal restore from this image, but the main goal was to capture all the data files rather than make a perfect image of the drive. From there I went on to make the bootable USB drive. That turned out to be super easy, even though it takes up a ton of disk space. DiskImage comes with a nice wizard that guides you through downloading the Windows AIK and then it builds a bootable Windows environment from those files. You have to download the Windows AIK and that file alone is around 1.7GB. Then you have to install it. O&O needs to use the files as this is a new Microsoft policy.

Once it makes and image you get the option to burn it to DVD or make a bootable USB. I made a bootable USB and tried it out on a netbook I had lying around. It’s a prefect use for some of those old 1GB thumb drives that have no other use. Building the image only took a few minutes and I didn’t have to configure any settings or files. The USB drive booted just fine and I was able to clone an entire drive to a portable USB drive. A pretty painless process.

The big test will come later today when I go to clone the root drive of my machine. I still need to move a few files out of the way to conserve a few more gigs, but then the machine will be ready. O&O DiskImage is already installed, but I’m going to boot from this USB drive to make the first image without anything running. I’ll write that image to one of the external drive and from then on it’ll make a new image every 2 weeks just to make sure I have a good copy. After all this time I’m finally getting around to creating good backups of my machines.

Here’s something to keep in mind, if you were judicious with how you stored applications and data, you could buy a 128GB thumb drive from Amazon for less than $50 and backup your entire system to that same drive. It would be fast, reliable and available in the palm of your hand. In fact, I’m considering doing just that.

image

Other articles of interest:

O&O DiskImage Pro 8.5 on Sale for $14

I got this as an email, O&O DiskImage Pro is on sale for a mere $14. O&O is one of those tools that allows you to backup the files on your machine as well as clone the entire drive. One of the cool features is you can make a backup of a drive and then mount that file like it was drive. Even if the drive is gone you can still work with it like it was installed. I’ve also used DiskImage to clone a drive before I  did a replacement. I upgraded from a small 500GB drive to a massive 3TB system drive and I was able to transfer the entire OS and all my apps without incident. I probably should have just reinstalled, but I figured it would be more fun to risk everything and just clone the whole machine. Funny thing is, it worked no problem.

I’ve also used Acronis True Image and I’m not sure which is better. They both work really well so I would say it’s a matter of getting whichever one is on sale. If you’re looking for some backup and imaging software, O&O DiskImage Pro is a good choice. The sale ends soon so you need to act fast.

If DiskImage isn’t quite your thing, you can use the coupon code – H6D-RHT-INT – to get a 15% discount of whatever you want.

New features of O&O DiskImage 8.5 Pro at a glance:
 
– Easier to use
– Reliable Images
– Backups are created automatically
– Backup files, file types, drives or your entire PC with just the push of a button
– Now supports EFI/UEFI systems as well as BIOS
– Quick backup of e.g. whole music collections with integrated file backup
– Have your old system restored any time you want, including operating system, applications, files and settings
– Integration of ISO files as virtual drives
– Great Price (won the "Good Buy" prize in comparison test from PC Magazine issue 1/2012)
– Create Windows Boot CD directly from within O&O DiskImage
– Compatible with Windows 8.1, 8, 7, Vista and XP
– Compatible with all previous versions of O&O DiskImage

https://shop.oo-software.com/36/purl-diskimage8

Other articles of interest:

VirtualBox Cannot register the image because UUID already exists

I’ve ran into a snag with VirtualBox. I made some images on my work laptop and when I try to load them on my home desktop machine I run into the following error:

Cannot register the image ‘C:\Program Files\Oracle\VirtualBox\VBoxGuestAdditions.iso’ with UUID ‘{4a16c3ed-691e-4878-9576-d1113bc5a699}’
because a ‘C:\Program Files\Oracle\VirtualBox\VBoxGuestAdditions.iso’ with UUID {…} already exists

It turns out the Guest Additions ISO is loaded for one of the images, but I have no idea which one since UUIDs mean nothing to me. Basically, the Virtual Machine won’t load and there doesn’t seem to be a whole you can do about it from the UI.

After doing some digging I believe I have a way to get around the problem quite easily.

Go into the directory where the Virtual Machine file is located and open the .VBOX file. It’s an XML and is easily read by an editor such as Notepad++.

Look for the line: <HardDisk uuid="{4a16c3ed-691e-4878-9576-d1113bc5a699}" location="Windows 2008.vdi" format="VDI" type="Normal"/> as in this example:

<HardDisks>
  <HardDisk uuid="{4a16c3ed-691e-4878-9576-d1113bc5a699}" location="Windows 2008.vdi" format="VDI" type="Normal"/>
</HardDisks>

Remove the whole HardDisk uuid= entry so that there is no entry between the two HardDisk tags.

Save the file and double-click the .VBOX filename again. It should load correctly and the image should appear in the list of machines. You can add the Guest Additions back in once the machine starts up again.

You may also see this error when trying to clone the drive:

"Failed to clone the virtual machine <name>.
Cannot register the image ‘C:\Program Files\Oracle\VirtualBox\VBoxGuestAdditions.iso’
with UUID { <number> } because a CD/DVD image ‘C:\Program Files\Oracle\VirtualBox\VBoxGuestAdditions.iso’
with UUID { <number> } already exists.

Other articles of interest:

Converting A Physical Hard Drive To A Virtual Hard Disk

At first glance the project seemed easy – clone the physical hard drive inside a server and restore it into VirtualBox so as to use the virtual copy. Turns out, it doesn’t work the way I envisioned it in my head. All the latest software made promises of one-click cloning and on the fly conversion to VHD. But in the end, after three days of trying, I’m scrapping this project. I just can’t seem to get it to work.

I tried using the latest software like O&O DiskImage 6, which listed VHD as one of the output formats. Well, it outputs to VHD alright, but that image doesn’t load. I cloned the drive without incident, but for the life of me I can’t that server to boot in a virtual environment. I created a VHD, I restored to a new VDI, I installed a new OS and tried the restore from there, I used a boot CD and restored from there. Not one of these methods would actually produce a working system. I can lay down the data to a data drive and see all the content with no problem, but no matter which process I use I can’t seem to get a bootable clone of my server. I admit, I’m not the sharpest knife in the things that holds knives, but I can’t for the life of me see what I’m doing wrong. I’ve been trying for three days and have called it quits.

This was supposed to be a simple task, a 3-4 hour job that would transport the server from the physical realm to the virtual one. With the amount of time I’ve wasted I could have installed a new server, installed all the frameworks and rebuilt everything from scratch, which is exactly what I’m going to do. I wanted a clone so I could perform maintenance with minimal downtime. If I had to rebuild the damn thing, I might as well start over and do a full blown upgrade.It’s not what I had in mine, but when all else fails, reinstalled is the best option.

If anyone knows the right process, the right software, the right way to hold your fingers to clone a drive and get it to load in VirtualBox, please let me know. I’m dying to know how it’s done. It’s sort of like a magic trick, I want to know how the cool kids do it.

Other articles of interest:

Recent Comments

  • How To Disable the Quicken Registration Prompt (30)
    • David: A BIG Thank you! I regularly reinstall Windows OS’s using different hardware configs. In short, Quicken 2011 (it’s March of 2020 as I write this) has been a program I’ve been very happy with and continue to use....
    • Karen L: Today I rang Reckon Australia again, got a different guy and he talked me through the process of getting me a new product key to enter since I already had the licence and it had been extended. Reckon have only extended it by 1...
    • Karen L: I have Australian Quicken 2008 on Windows 8.1. It keeps asking me to renew my licence which Reckon did for me however the activation won’t work. I tried this to disable the registration prompt however it did not stop the...
  • Parsing Strings in Katalon – Split, Substring and Readlines (6)
    • Don Pedro: String tempText=”Date Month January. Revenue $1,355,721.00″ println(tempText.split(“ \$”)[1]) You need to escape the $ with \$ The [1] on the split captures characters on the right of the split [0]...
    • Prasad: Hi, I need to get the substring from the below string ‘Date Month January. Revenue $1,355,721.00’ I want to extract text after $ value. Please help Thank you
  • Working with Dates and Date Formatting in Katalon Studio (15)
    • Sangeethaa: How to get previous day’s date(Yesterday’s date)? Actually I was using today.previous() before,it was working fine till today morning.Now its not retrieving right date. Can anyone please guide me on this.
    • Don Pedro: That could be a little tricky. First, is the text/format always going to be the same? You will need to do some parsing. Separate the first but of text at 2019. After that, split the text again to get rid of Central Standard...
    • Don Pedro: It should be of the same Date type as today. You could then do some calendar trickery with Calendar /*Calendar c = Calendar.getInstance(); //c.set(Calendar.MONTH, 1) //Set the month, 0=January, 11=December println...
    • josh: I’m testing a page with a string like “Updated November 21, 2019 16:25:32 PM Central Standard Time.” How might I capture the date and time and compare it to current time to verify that the update time was within...
    • zakir hussain: today = new Date() lastWeek = (today – 1.week) can u please help me in understanding what is the return type of lastweek? and I wanted to set nextyear date how can i do it
  • Output status messages and test information by writing to the Log File Viewer in Katalon Studio (6)
    • Saranya: Good One. Could you plz share link to access all your katalon related blogs. ThankQ
    • Rodrigo Calabretta: I’m using the KeywordUtil.markFailed or KeywordUtil.markError and my test stops is being shown as Error and If I use in the @afterTestCase the testCaseContext.getTestCaseSta tus() to show the status test case...
  • Setting up Environment Profiles in Katalon Studio (2)
    • Don Pedro: Not quite sure I understand. The term “Execution Profile” is normally used now, but they are still GlobalVariables and are created in the same way for version 7 as previous. You make a new execution profile, then...
  • Here is my drive cluster (2)
    • Don Pedro: While I still have those drives, the drive cluster looks nothing like that now. Almost all of my external drives have had the cases removed and they have been installed into a series of MediaSonic 8 Bay Drive Enclosures. I...
    • Marin Boucher: Hi! Verry funny blog with “go to the point” on many post! I spent good time reading some of your post. Regarding this one about NAS, “many NAS” in fact, I would be curious to see a screenshot of...