Another success with Katalon Studio

Previously I made mentioned that we migrated from one web platform to another and Katalon was instrumental in running hundreds of tests to ferret out where we had data or code issues.

Right on the heels of that migration, we needed to do an a framework upgrade. In essence we had to run the same validation tests again to confirm we didn’t have any code or data issues.

The test suite has grown and includes several new tests, but still takes less than 10 minutes to run. Plus, when using the data driven test case I discussed earlier, this can be run for dozens of passes, one after the other, and we just check the Reports folder to see if there were any problems.

At the customer site, their QA resource wanted a minimum of a week to confirm the framework upgrade. I have to admit, my jaw dropped. I didn’t understand why it would take so long to go through a dozen or so passes with a mixture of users.

Then it dawned on me. He needs to validate the site manually as they aren’t using any automated methods. He needs to click each page, fill in the forms, drill down through each subpage and confirm everything loads and is visible. He then needs to compare data on one page to the information on another and calculate the totals of multiple columns.

Based on other commitments, that may only be 1 or 2 validation passes per day. In order to feel comfortable, they would need to confirm at least a dozen, and the more the better. The time quickly adds up and a week might only get the bare minimum done.

With the help of Katalon and what we have in place, I can perform a dozen validations per day, while I work on other projects. The tasks can be run in the background, on another screen or even headless and I just have to check the reports.

Since I’ve run these tests dozens of times already, I know what the reports should look like, so I can easily pick out any anomalies.

We are continually developing and refining our tests, but the time investment is paying off with multiple hours saved per validation pass. At our current rate, we only need a couple of hours to validate 90% of the site. That last 10% is for validating against source data. But since so much time is saved up front, even with that manual 10%, we can do all our validation and be confident in what we deliver within a day.

Plus, our development time is getting shorter each iteration as the code gets better and tighter and common routines get grouped together. Katalon is making some serious strides for us and to be honest, I feel we’ve only scratched the surface. I’m very excited over what we will have in place 6 months from now.

Other articles of interest:

2 Responses to Another success with Katalon Studio

  • Mahesh Joshi says:

    Hi Don, I just started following your blog in regards to katalon.

    I want to introduce katalon studio at my work we do manual testing at work at the moment.

    What approach I should use for proof of concept with katalon for work. do you have sample test cases you can share?

    Regards,
    Mahesh

  • Don Pedro says:

    Since Katalon is free, a very practical demonstration of what it can would be to create the code needed to fill in forms. That was one of my first tasks as Katalon could fill in a lengthy form in seconds versus the minute or so it would take me. The ability to create user data in a fraction of the time it takes manually is a great start.

    Another useful demo is link validation. For example, to enter text in a search field, confirm the results contain that text, click the link and then validate something on the following page. That process is at the heart of many tests.

    I have posted snippets from a lot of the test cases I’ve been working on. I’m not able to show more as it’s from customer websites and would infringe on their business. However, I have tried to explain the concept and given the core detail of the code.

    For automation, take a set of manual steps you perform over and over again, write the code that emulates that, and show how much faster it can be done through code than manually. That to me is the start of using automation. Write code that performs repeatable steps which in turn saves time. It’s hard to argue with that benefit.

Leave a Reply to Mahesh Joshi Cancel reply

Your email address will not be published. Required fields are marked *

Recent Comments
  • Working with Dates and Date Formatting in Katalon Studio (6)
    • Ajoo: Thank you for the details. How do i remove leading “0” from dates. i.e. while formatting i receive 04/21/2019, but i need 4/21/2019. (same applies for date)
    • Ann: THANK YOU ! That worked perfectly !
  • How To Disable the Quicken Registration Prompt (21)
    • Susan Long: I bought my quicken disc in the beginning and it came with a registration number. I rang the helpline and they gave me the code to put in and talked me through it. It you downloaded your version then you don’t own it...
    • Peter: You might consider running your old version of Quicken on an ancient computer. This is what I have done for years. The newer versions are fraught with problems- criminal, in my opinion. One version made mathmatical errors when...
    • Roslyn Chamberlain: Can I stop the countdown in quicken 2001 says only 8 sessions left. and what will happen after?
  • What is Katalon Studio? A Distro of Selenium, Groovy and Eclipse (1)
    • Mahesh: Looking for more posts on katalon studio.your katalon stuffs are always exiting
  • Simple wildcard searches for pattern matching (2)
    • Don Pedro: For that scenario it seems .contains would be your choice. For example, variable.contains(‘amazo n.com’) to see if the url had amazon.com. In that case, www.amazon.com, forum.amazon.com, retail.amazon.com would all...
    • Jony: Hi, How can I use a wild card to assert a URL is the one I want. I just want to verify the domain ==expected but not anything after it. Tried * but not working and only works when I have full URL.
  • Create a Dynamic Object at Runtime (2)
    • Saish: How to add shadow root parent to this runtime object..
    • Jeremy Brien: I appreciate this! I saw this post on LinkedIn this morning and was able to find a use case for it! I found that defining my xpath with an iterable variable allows me to loop through and capture text from tables created...
  • Output status messages and test information by writing to the Log File Viewer in Katalon Studio (2)
    • Don Pedro: That would be things like: log.logWarning(‘The import date listed on the site is: ‘ + importDate) log.logWarning(‘The value from the site is: ‘ + salesFigure) log.logWarning(‘Filter Results for ‘ +...
    • Prashant Pednekar: Thanks for the informative article but can we also put some variable values to make it more exciting.
  • Setting up a repeatable Search Method in Katalon Studio (1)
    • RJ: Thanks a lot! This is very helpful 🙂
  • Filling forms with random numbers in Katalon Studio (3)
    • Patrick Clough: We created a handy random string generator custom keyword. The method takes in a string for the type of string you want, and an integer for the length. Looks like this: static String RANDOM_ALPHANUM =...
    • Don Pedro: randomNumber is the variable that holds the result of generating a new random number. Depending on how things work on your site, you might need to convert the number to a String before it’s recognized correctly....