Bait and Tackle Limited Time Building (LTB) – Building Payout and Upgrade Cost – Crime City

The Bait and Tackle LTB has been out for awhile, but this is the first time I’ve seen the complete list of stats. This is another less than spectacular offering that won’t do much to increase IPH, especially without modifiers. The initial cost is just shy of $130M and will cost the usual $32B to complete. That will yield and income of $32M every 17 hours. The collection amount and time are certainly less than stellar. As we’ve seen before, the reward is the low defense item "Weapon Payload" with 403,800 atk and 100,900 def with +1% Melee Attack. Seriously, when can we get a weapon with decent defense on it?

To be honest, I would like to see Gree show some stones and throw out a multibillion dollar building with a reward sporting a couple of million in attack and defense. Give me a building that costs a few billion to buy but also gives me a final income of $1 billion per 24 hours. That’d be kinda cool, no?

Just to throw the stats out there, I currently have $821 Billion in the bank with an IPH of $362 Million. With these junk buildings my IPH isn’t going anywhere.

Base building cost and payout

Level Cost Income Hours
1 $129,460,344 $1,018,901 24
2 $216,198,774 $2,037,802 30
3 $361,051,953 $3,566,154 36
4 $602,956,762 $5,603,956 42
5 $1,006,937,793 $8,151,208 48
6 $1,681,586,114 $11,207,911 54
7 $2,808,248,810 $14,774,065 60
8 $4,689,775,513 $18,849,669 66
9 $7,831,925,107 $23,434,723 72
10 $13,079,314,929 $30,567,030 78
Total $32,407,456,099.00    

Building Payout with Modifiers

Level Payout +35% Payout +65%
1 $1,375,516 $1,681,187
2 $2,751,033 $3,362,373
3 $4,814,308 $5,884,154
4 $7,565,341 $9,246,527
5 $11,004,131 $13,449,493
6 $15,130,680 $18,493,053
7 $19,944,988 $24,377,207
8 $25,447,053 $31,101,954
9 $31,636,876 $38,667,293
10 $41,265,491 $50,435,600

Building Upgrade Cost with Modifiers

Level Upgrade -30% Upgrade -51%
1    
2 $151,339,142 $105,937,399
3 $252,736,367 $176,915,457
4 $422,069,733 $295,448,813
5 $704,856,455 $493,399,519
6 $1,177,110,280 $823,977,196
7 $1,965,774,167 $1,376,041,917
8 $3,282,842,859 $2,297,990,001
9 $5,482,347,575 $3,837,643,302
10 $9,155,520,450 $6,408,864,315
Total $22,594,597,029 $15,816,217,920

LTB Sheet All Buildings

Other articles of interest:

Leave a Reply

Your email address will not be published. Required fields are marked *

Recent Comments
  • Output status messages and test information by writing to the Log File Viewer in Katalon Studio (6)
    • Saranya: Good One. Could you plz share link to access all your katalon related blogs. ThankQ
    • Rodrigo Calabretta: I’m using the KeywordUtil.markFailed or KeywordUtil.markError and my test stops is being shown as Error and If I use in the @afterTestCase the testCaseContext.getTestCaseSta tus() to show the status test case...
  • Working with Dates and Date Formatting in Katalon Studio (14)
    • Don Pedro: That could be a little tricky. First, is the text/format always going to be the same? You will need to do some parsing. Separate the first but of text at 2019. After that, split the text again to get rid of Central Standard...
    • Don Pedro: It should be of the same Date type as today. You could then do some calendar trickery with Calendar /*Calendar c = Calendar.getInstance(); //c.set(Calendar.MONTH, 1) //Set the month, 0=January, 11=December println...
    • josh: I’m testing a page with a string like “Updated November 21, 2019 16:25:32 PM Central Standard Time.” How might I capture the date and time and compare it to current time to verify that the update time was within...
    • zakir hussain: today = new Date() lastWeek = (today – 1.week) can u please help me in understanding what is the return type of lastweek? and I wanted to set nextyear date how can i do it
    • ALLAN FORD: Useful !
    • Don Pedro: Not sure I understand what you are trying to do.
    • Don Pedro: formattedDate = mydate.format(“M/dd/yyy& #8221;)
  • Setting up Environment Profiles in Katalon Studio (2)
    • Don Pedro: Not quite sure I understand. The term “Execution Profile” is normally used now, but they are still GlobalVariables and are created in the same way for version 7 as previous. You make a new execution profile, then...
    • Aparna: Hello, Your documentation is excellent and has helped me understand many things. But this article above seems outdated and I need help in creating my own Global variables and all the documentation out there seems to be point to...
  • Here is my drive cluster (2)
    • Don Pedro: While I still have those drives, the drive cluster looks nothing like that now. Almost all of my external drives have had the cases removed and they have been installed into a series of MediaSonic 8 Bay Drive Enclosures. I...
    • Marin Boucher: Hi! Verry funny blog with “go to the point” on many post! I spent good time reading some of your post. Regarding this one about NAS, “many NAS” in fact, I would be curious to see a screenshot of...
  • How To Disable the Quicken Registration Prompt (27)
    • debra: didn’t work for me… my 2007 – which I am keeping on my older mac.
  • Adding entries to an open Excel spreadsheet during runtime (1)
    • IanG: Hi: Seems like nobody else has described (in detail) how Katalon can be configured to test an API by reading the first entry from a multi-row multi column XLSX spreadsheet, executing a test, writing the result to another column (or...