Kiddie Playground Limited Time Building (LTB) – Building Payout and Upgrade Cost – Crime City

Here we are with another LTB, and by the look of things, Gree is grasping for ideas. I’m all for a bit of whimsy in the hood, but this thing is just plain silly. At least it’s not as big as that damn amusement park.

The initial cost of this one isn’t too bad, but it goes up quick. To full upgrade it’ll cost around $32 Billion. For that, you will earn $42 Million per day. That’s not bad, but far from great. Even with a boat load of mods, you’ll still only get $70 Million per day out of the thing. That’s a far cry from the Grillz, Pub and others. However, if you keep plugging away, you can make a decent amount of cash and again, it has a small foot print.

The prize for each level is Sweet Retreat Truck ATK 403,800 DEF 100,900 +1% Car Attack, which is yet another insanely low powered defense weapon. I mean damn, when are we going to get some defense going?

As you should expect, I have two of these built and upgrading, because I have nothing else to spend my money on. I donated an absolute truckload to my syndicate to finish buying off the last couple of bonuses. I could go buy a bunch of weapons that will be useless within a week, but where’s the fun in that? For now, I’ll just upgrade these and wait for an event to come along that doesn’t suck.

Base building cost and payout

Level Cost Income Hours
1 $126,909,464 $1,410,105 24
2 $211,938,805 $2,820,210 30
3 $353,937,804 $4,935,368 36
4 $591,076,133 $7,755,578 42
5 $987,097,142 $11,280,840 48
6 $1,648,452,227 $15,511,155 54
7 $2,752,915,219 $20,446,523 60
8 $4,597,368,416 $26,086,943 66
9 $7,677,605,255 $32,432,415 72
10 $12,821,600,776 $42,303,150 78
Total $31,768,901,241.00    

Building Payout with Modifiers

Level Payout +35% Payout +65%
1 $1,903,642 $2,326,673
2 $3,807,284 $4,653,347
3 $6,662,747 $8,143,357
4 $10,470,030 $12,796,704
5 $15,229,134 $18,613,386
6 $20,940,059 $25,593,406
7 $27,602,806 $33,736,763
8 $35,217,373 $43,043,456
9 $43,783,760 $53,513,485
10 $57,109,253 $69,800,198
  Total  

Building Upgrade Cost with Modifiers

Level Upgrade -30% Upgrade -51%
1    
2 $148,357,164 $103,850,014
3 $247,756,463 $173,429,524
4 $413,753,293 $289,627,305
5 $690,967,999 $483,677,600
6 $1,153,916,559 $807,741,591
7 $1,927,040,653 $1,348,928,457
8 $3,218,157,891 $2,252,710,524
9 $5,374,323,679 $3,762,026,575
10 $8,975,120,543 $6,282,584,380
Total $22,149,394,244 $15,504,575,971

LTB Sheet All Buildings

Other articles of interest:

One Response to Kiddie Playground Limited Time Building (LTB) – Building Payout and Upgrade Cost – Crime City

  • Paul says:

    Yea this thing is definitely ridiculous but like you said it has a small footprint and it gives us players something to do…probably take these both to level 7 before moving on to something else

Leave a Reply to Paul Cancel reply

Your email address will not be published. Required fields are marked *

Recent Comments
  • How To Disable the Quicken Registration Prompt (29)
    • Karen L: Today I rang Reckon Australia again, got a different guy and he talked me through the process of getting me a new product key to enter since I already had the licence and it had been extended. Reckon have only extended it by 1...
    • Karen L: I have Australian Quicken 2008 on Windows 8.1. It keeps asking me to renew my licence which Reckon did for me however the activation won’t work. I tried this to disable the registration prompt however it did not stop the...
  • Parsing Strings in Katalon – Split, Substring and Readlines (6)
    • Don Pedro: String tempText=”Date Month January. Revenue $1,355,721.00″ println(tempText.split(“ \$”)[1]) You need to escape the $ with \$ The [1] on the split captures characters on the right of the split [0]...
    • Prasad: Hi, I need to get the substring from the below string ‘Date Month January. Revenue $1,355,721.00’ I want to extract text after $ value. Please help Thank you
  • Working with Dates and Date Formatting in Katalon Studio (15)
    • Sangeethaa: How to get previous day’s date(Yesterday’s date)? Actually I was using today.previous() before,it was working fine till today morning.Now its not retrieving right date. Can anyone please guide me on this.
    • Don Pedro: That could be a little tricky. First, is the text/format always going to be the same? You will need to do some parsing. Separate the first but of text at 2019. After that, split the text again to get rid of Central Standard...
    • Don Pedro: It should be of the same Date type as today. You could then do some calendar trickery with Calendar /*Calendar c = Calendar.getInstance(); //c.set(Calendar.MONTH, 1) //Set the month, 0=January, 11=December println...
    • josh: I’m testing a page with a string like “Updated November 21, 2019 16:25:32 PM Central Standard Time.” How might I capture the date and time and compare it to current time to verify that the update time was within...
    • zakir hussain: today = new Date() lastWeek = (today – 1.week) can u please help me in understanding what is the return type of lastweek? and I wanted to set nextyear date how can i do it
  • Output status messages and test information by writing to the Log File Viewer in Katalon Studio (6)
    • Saranya: Good One. Could you plz share link to access all your katalon related blogs. ThankQ
    • Rodrigo Calabretta: I’m using the KeywordUtil.markFailed or KeywordUtil.markError and my test stops is being shown as Error and If I use in the @afterTestCase the testCaseContext.getTestCaseSta tus() to show the status test case...
  • Setting up Environment Profiles in Katalon Studio (2)
    • Don Pedro: Not quite sure I understand. The term “Execution Profile” is normally used now, but they are still GlobalVariables and are created in the same way for version 7 as previous. You make a new execution profile, then...
    • Aparna: Hello, Your documentation is excellent and has helped me understand many things. But this article above seems outdated and I need help in creating my own Global variables and all the documentation out there seems to be point to...
  • Here is my drive cluster (2)
    • Don Pedro: While I still have those drives, the drive cluster looks nothing like that now. Almost all of my external drives have had the cases removed and they have been installed into a series of MediaSonic 8 Bay Drive Enclosures. I...
    • Marin Boucher: Hi! Verry funny blog with “go to the point” on many post! I spent good time reading some of your post. Regarding this one about NAS, “many NAS” in fact, I would be curious to see a screenshot of...