Crusty Handlebar Limited Time Building (LTB) – Building Payout and Upgrade Cost – Crime City

This time around we have the Crusty Handlebar which sounds like something you will catch if you go looking for love in all the wrong places. That aside, it is the latest building and we finally get one with a small footprint. Unlike previous buildings that take up half the hood, this one is nice and compact. The initial investment is pretty heft at $120M. Which gives you an income of $670k per 12 hours. It’s not too bad.

The total investment will be $30Billion which will collect $20M. That’s not too good. Like the previous buildings, it’s going to cost a lot, but return only little. The main attraction of this building is the much smaller footprint. If you have the cash you should be able to find a place to stash this thing.

With mods you can drop the total price to around $15Billion and increase the income to $66M per day. If you max out two of these you can spend $30Billion to make $130Million per day. Not sure really sure it’s worth it.

And for the effort you basically get the same prize as before.
Flame Bandit    399,800     99,900     1% Car Attack

Hard to say if this building is worth it. The footprint is nice, and the income is fairly decent if you have the bonuses. But overall, this rascal costs a fortune and it will take awhile to earn your money back.

Base building cost and payout

Level Cost Income Hours
1 $120,750,000 $670,833 24
2 $201,652,500 $1,341,666 30
3 $336,759,675 $2,347,916 36
4 $562,388,657 $3,689,582 42
5 $939,189,058 $5,366,664 48
6 $1,568,445,726 $7,379,163 54
7 $2,619,304,363 $9,727,079 60
8 $4,374,238,286 $12,410,411 66
9 $7,304,977,937 $15,429,159 72
10 $12,199,313,155 $20,124,990 78
Total $30,227,019,357.00    

Building Payout with Modifiers

Level Payout +35% Payout +65%
1 $905,625 $1,106,874
2 $1,811,249 $2,213,749
3 $3,169,687 $3,874,061
4 $4,980,936 $6,087,810
5 $7,244,996 $8,854,996
6 $9,961,870 $12,175,619
7 $13,131,557 $16,049,680
8 $16,754,055 $20,477,178
9 $20,829,365 $25,458,112
10 $27,168,737 $33,206,234
  Total  

Building Upgrade Cost with Modifiers

Level Upgrade -30% Upgrade -51%
1    
2 $141,156,750 $98,809,725
3 $235,731,773 $165,012,241
4 $393,672,060 $275,570,442
5 $657,432,341 $460,202,638
6 $1,097,912,008 $768,538,406
7 $1,833,513,054 $1,283,459,138
8 $3,061,966,800 $2,143,376,760
9 $5,113,484,556 $3,579,439,189
10 $8,539,519,209 $5,977,663,446
Total $21,074,388,550 $14,752,071,985

LTB Sheet All Buildings

Other articles of interest:

Leave a Reply

Your email address will not be published. Required fields are marked *

Recent Comments
  • Working with Dates and Date Formatting in Katalon Studio (15)
    • Sangeethaa: How to get previous day’s date(Yesterday’s date)? Actually I was using today.previous() before,it was working fine till today morning.Now its not retrieving right date. Can anyone please guide me on this.
    • Don Pedro: That could be a little tricky. First, is the text/format always going to be the same? You will need to do some parsing. Separate the first but of text at 2019. After that, split the text again to get rid of Central Standard...
    • Don Pedro: It should be of the same Date type as today. You could then do some calendar trickery with Calendar /*Calendar c = Calendar.getInstance(); //c.set(Calendar.MONTH, 1) //Set the month, 0=January, 11=December println...
    • josh: I’m testing a page with a string like “Updated November 21, 2019 16:25:32 PM Central Standard Time.” How might I capture the date and time and compare it to current time to verify that the update time was within...
    • zakir hussain: today = new Date() lastWeek = (today – 1.week) can u please help me in understanding what is the return type of lastweek? and I wanted to set nextyear date how can i do it
    • ALLAN FORD: Useful !
    • Don Pedro: Not sure I understand what you are trying to do.
  • Output status messages and test information by writing to the Log File Viewer in Katalon Studio (6)
    • Saranya: Good One. Could you plz share link to access all your katalon related blogs. ThankQ
    • Rodrigo Calabretta: I’m using the KeywordUtil.markFailed or KeywordUtil.markError and my test stops is being shown as Error and If I use in the @afterTestCase the testCaseContext.getTestCaseSta tus() to show the status test case...
  • Setting up Environment Profiles in Katalon Studio (2)
    • Don Pedro: Not quite sure I understand. The term “Execution Profile” is normally used now, but they are still GlobalVariables and are created in the same way for version 7 as previous. You make a new execution profile, then...
    • Aparna: Hello, Your documentation is excellent and has helped me understand many things. But this article above seems outdated and I need help in creating my own Global variables and all the documentation out there seems to be point to...
  • Here is my drive cluster (2)
    • Don Pedro: While I still have those drives, the drive cluster looks nothing like that now. Almost all of my external drives have had the cases removed and they have been installed into a series of MediaSonic 8 Bay Drive Enclosures. I...
    • Marin Boucher: Hi! Verry funny blog with “go to the point” on many post! I spent good time reading some of your post. Regarding this one about NAS, “many NAS” in fact, I would be curious to see a screenshot of...
  • How To Disable the Quicken Registration Prompt (27)
    • debra: didn’t work for me… my 2007 – which I am keeping on my older mac.
  • Adding entries to an open Excel spreadsheet during runtime (1)
    • IanG: Hi: Seems like nobody else has described (in detail) how Katalon can be configured to test an API by reading the first entry from a multi-row multi column XLSX spreadsheet, executing a test, writing the result to another column (or...