Dockside Warehouse Limited Time Building (LTB) – Building Payout and Upgrade Cost – Crime City

It’s time for another LTB and if you were paying attention you were able to get a massive headstart on this one. Gree messed up and put the building in the Store several days ago so I already have 2 of these built with one already at level 6. I checked my inventory and I do indeed have 6 of the Smuggler’s Vans that are given out as a prize. I thought this was just a new building they added so I went ahead and started. I should have known something was a little screwy based on the stats.

What we have is the Dockside Warehouse which has a collection time of 16 hours. Yes, it’s already got people distressed over the collection time. The initial cost is $116 million with a base output of $859,259. To be honest, it’s not a bad building. I already have some 16 hour buildings so the time doesn’t bother me. But this rascal is going to cost you. Without any bonuses, it’s over $29 Billion to upgrade fully. That $30 Billion investment will net you close to $65 Million every 16 hours.

On the flip side, if you do have some bonuses, things get a lot better. The total cost is only $14 Billion with an output over $116 Million per 16 hours. It’s nowhere near as good as the Grillz building, but it’s not too shabby. It will certainly bring in some income over the long haul.
The prize for each upgrade is – Smuggler’s Van Atk-395,874 / Def – 98,868 with a 1% Car Defense. It’s not as good as the last building that’s for sure. But unless something goes horribly awry, I should have 10 of these in a couple days from now. I already have 6 so I’m way ahead. Hopefully you got a jump on the game and have a couple of levels under your belt.

Just to throw a couple figures out there, I’m currently tracking at $177M IPH with $80B in the bank. With both of these fully upgraded, I should be tracking pretty well to hit $200M IPH.

Base building cost and payout

Level Cost Income Hours
1 $116,000,000 $859,259 24
2 $193,720,000 $2,577,777 30
3 $323,512,400 $5,155,554 36
4 $540,265,708 $8,592,590 42
5 $902,243,732 $12,888,885 48
6 $1,506,747,033 $18,903,698 54
7 $2,516,267,545 $26,637,029 60
8 $4,202,166,800 $36,088,878 66
9 $7,017,618,557 $47,259,245 72
10 $11,719,422,990 $64,444,425 78
Total $29,037,964,765.00    

Building Payout with Modifiers

Level Payout +35% Payout +65%
1 $1,160,000 $1,417,777
2 $3,479,999 $4,253,332
3 $6,959,998 $8,506,664
4 $11,599,997 $14,177,774
5 $17,399,995 $21,266,660
6 $25,519,992 $31,191,102
7 $35,959,989 $43,951,098
8 $48,719,985 $59,546,649
9 $63,799,981 $77,977,754
10 $86,999,974 $106,333,301

Building Upgrade Cost with Modifiers

Level Upgrade -30% Upgrade -51%
1    
2 $135,604,000 $94,922,800
3 $226,458,680 $158,521,076
4 $378,185,996 $264,730,197
5 $631,570,612 $442,099,429
6 $1,054,722,923 $738,306,046
7 $1,761,387,282 $1,232,971,097
8 $2,941,516,760 $2,059,061,732
9 $4,912,332,990 $3,438,633,093
10 $8,203,596,093 $5,742,517,265
Total $20,245,375,336 $14,171,762,735

 

LTB Sheet All Buildings!!!

Other articles of interest:

6 Responses to Dockside Warehouse Limited Time Building (LTB) – Building Payout and Upgrade Cost – Crime City

  • paul says:

    Why not a review on the port authority building??

  • Don Pedro says:

    Unfortunately, that building costs 500 gold so I don’t have one. I’m sure it’s stats and income levels are extremely high, but I haven’t seen any stats for it, so I really don’t know anything about it.

  • Munzio says:

    Yeah…I grabbed the early ltb release also. They are both now sitting pretty at lvl 10. My IPH is now at 254mil…

  • Don Pedro says:

    HAHA! You’re still way out in front of me. The 2nd building is upgrading to Lvl 10 and I currently have $198 IPH. You’ve managed to double your IPH in 3 months, that’s damn impressive! Well done!

    Once this building is done I’m going back and upgrading some of the other LTBs I didn’t finish. I’m upgrading the No Interest Savings currently and will move to the Fine Gems once they finish.

  • Munzio says:

    Feel free to add me 161990337.

  • paul says:

    I’m about to add you now munzio…what’s your mafia code don pedro?

Leave a Reply

Your email address will not be published. Required fields are marked *

Recent Comments
  • How To Disable the Quicken Registration Prompt (21)
    • Susan Long: I bought my quicken disc in the beginning and it came with a registration number. I rang the helpline and they gave me the code to put in and talked me through it. It you downloaded your version then you don’t own it...
    • Peter: You might consider running your old version of Quicken on an ancient computer. This is what I have done for years. The newer versions are fraught with problems- criminal, in my opinion. One version made mathmatical errors when...
    • Roslyn Chamberlain: Can I stop the countdown in quicken 2001 says only 8 sessions left. and what will happen after?
  • What is Katalon Studio? A Distro of Selenium, Groovy and Eclipse (1)
    • Mahesh: Looking for more posts on katalon studio.your katalon stuffs are always exiting
  • Simple wildcard searches for pattern matching (2)
    • Don Pedro: For that scenario it seems .contains would be your choice. For example, variable.contains(‘amazo n.com’) to see if the url had amazon.com. In that case, www.amazon.com, forum.amazon.com, retail.amazon.com would all...
    • Jony: Hi, How can I use a wild card to assert a URL is the one I want. I just want to verify the domain ==expected but not anything after it. Tried * but not working and only works when I have full URL.
  • Create a Dynamic Object at Runtime (2)
    • Saish: How to add shadow root parent to this runtime object..
    • Jeremy Brien: I appreciate this! I saw this post on LinkedIn this morning and was able to find a use case for it! I found that defining my xpath with an iterable variable allows me to loop through and capture text from tables created...
  • Output status messages and test information by writing to the Log File Viewer in Katalon Studio (2)
    • Don Pedro: That would be things like: log.logWarning(‘The import date listed on the site is: ‘ + importDate) log.logWarning(‘The value from the site is: ‘ + salesFigure) log.logWarning(‘Filter Results for ‘ +...
    • Prashant Pednekar: Thanks for the informative article but can we also put some variable values to make it more exciting.
  • Setting up a repeatable Search Method in Katalon Studio (1)
    • RJ: Thanks a lot! This is very helpful 🙂
  • Filling forms with random numbers in Katalon Studio (3)
    • Patrick Clough: We created a handy random string generator custom keyword. The method takes in a string for the type of string you want, and an integer for the length. Looks like this: static String RANDOM_ALPHANUM =...
    • Don Pedro: randomNumber is the variable that holds the result of generating a new random number. Depending on how things work on your site, you might need to convert the number to a String before it’s recognized correctly....
    • Seth: When you are setting up randomNumber is this a new keyword or a new variable? I am trying to randomly generate unique socials and can’t seem to connect my generator to my Set Text.
  • Working with Dates and Date Formatting in Katalon Studio (5)
    • Ann: THANK YOU ! That worked perfectly !