Shamrock Pub Limited Time Building (LTB) – Building Payout and Upgrade Cost – Crime City

Ah, so here we are with a new building just in time for St. Patrick’s Day. The Shamrock Pub is a costly little structure with an opening price tag of $99 million. The base payout is $779k every 12 hours. Taking those stats into account, this isn’t that great of a building. The price is high, the return is low. But if you have modifiers, it gets quite a bit better.

To fully upgrade will cost you just shy of $24 Billion which to be honest is pretty damn ridiculous. But at that level you get $58 Million every 12 hours. That’s somewhat respectable.

With the modifiers you can cut the upgrade cost in half to $12 Billion and bump the payout to nearly $100 Million every 12 hours. Collecting $200 Million a day from this alone isn’t too shabby. That would make it one of the higher ranking buildings we’ve been offered so far.

The price is the Lucky Green Pub – Atk:147,315 Def 79,723 1% Gun Defense. You can stack this item as you complete more levels.

To be honest, for lower level incomes, it’s not a great building. It really doesn’t make much money until you get a few levels in.

Onward and upward! Good luck everyone!

Base building cost and payout

Level Cost Income Hours
1 $99,000,000 $779,000 24
2 $165,330,000 $2,337,000 30
3 $276,101,100 $4,674,000 36
4 $461,088,837 $7,790,000 42
5 $770,018,358 $11,685,000 48
6 $1,285,930,658 $17,138,000 54
7 $2,147,504,198 $24,149,000 60
8 $3,586,332,011 $32,718,000 66
9 $5,989,174,458 $42,845,000 72
10 $10,001,921,345 $58,425,000 78
Total $24,782,400,965.00    

Building Payout with Modifiers

Level Payout +35% Payout +65%
1 $1,051,650 $1,285,350
2 $3,154,950 $3,856,050
3 $6,309,900 $7,712,100
4 $10,516,500 $12,853,500
5 $15,774,750 $19,280,250
6 $23,136,300 $28,277,700
7 $32,601,150 $39,845,850
8 $44,169,300 $53,984,700
9 $57,840,750 $70,694,250
10 $78,873,750 $96,401,250

Building Upgrade Cost with Modifiers

Level Upgrade -30% Upgrade -51%
1    
2 $115,731,000 $81,011,700
3 $193,270,770 $135,289,539
4 $322,762,186 $225,933,530
5 $539,012,851 $377,308,995
6 $900,151,461 $630,106,022
7 $1,503,252,939 $1,052,277,057
8 $2,510,432,408 $1,757,302,685
9 $4,192,422,121 $2,934,695,484
10 $7,001,344,942 $4,900,941,459
Total $17,278,380,676 $12,094,866,473

LTB Sheet All Buildings!!!

Other articles of interest:

Leave a Reply

Your email address will not be published. Required fields are marked *

Recent Comments
  • How To Disable the Quicken Registration Prompt (21)
    • Susan Long: I bought my quicken disc in the beginning and it came with a registration number. I rang the helpline and they gave me the code to put in and talked me through it. It you downloaded your version then you don’t own it...
    • Peter: You might consider running your old version of Quicken on an ancient computer. This is what I have done for years. The newer versions are fraught with problems- criminal, in my opinion. One version made mathmatical errors when...
    • Roslyn Chamberlain: Can I stop the countdown in quicken 2001 says only 8 sessions left. and what will happen after?
  • What is Katalon Studio? A Distro of Selenium, Groovy and Eclipse (1)
    • Mahesh: Looking for more posts on katalon studio.your katalon stuffs are always exiting
  • Simple wildcard searches for pattern matching (2)
    • Don Pedro: For that scenario it seems .contains would be your choice. For example, variable.contains(‘amazo n.com’) to see if the url had amazon.com. In that case, www.amazon.com, forum.amazon.com, retail.amazon.com would all...
    • Jony: Hi, How can I use a wild card to assert a URL is the one I want. I just want to verify the domain ==expected but not anything after it. Tried * but not working and only works when I have full URL.
  • Create a Dynamic Object at Runtime (2)
    • Saish: How to add shadow root parent to this runtime object..
    • Jeremy Brien: I appreciate this! I saw this post on LinkedIn this morning and was able to find a use case for it! I found that defining my xpath with an iterable variable allows me to loop through and capture text from tables created...
  • Output status messages and test information by writing to the Log File Viewer in Katalon Studio (2)
    • Don Pedro: That would be things like: log.logWarning(‘The import date listed on the site is: ‘ + importDate) log.logWarning(‘The value from the site is: ‘ + salesFigure) log.logWarning(‘Filter Results for ‘ +...
    • Prashant Pednekar: Thanks for the informative article but can we also put some variable values to make it more exciting.
  • Setting up a repeatable Search Method in Katalon Studio (1)
    • RJ: Thanks a lot! This is very helpful 🙂
  • Filling forms with random numbers in Katalon Studio (3)
    • Patrick Clough: We created a handy random string generator custom keyword. The method takes in a string for the type of string you want, and an integer for the length. Looks like this: static String RANDOM_ALPHANUM =...
    • Don Pedro: randomNumber is the variable that holds the result of generating a new random number. Depending on how things work on your site, you might need to convert the number to a String before it’s recognized correctly....
    • Seth: When you are setting up randomNumber is this a new keyword or a new variable? I am trying to randomly generate unique socials and can’t seem to connect my generator to my Set Text.
  • Working with Dates and Date Formatting in Katalon Studio (5)
    • Ann: THANK YOU ! That worked perfectly !