A nice sweep of prizes in the Violetta Vritra event and that goofy Syndicate Showdown

So I got my 100 hits in on Violetta and our syndicate received the prize for taking her out 300 times over the 5 day period. Those are some big league prizes right there and there was a new prize for the Syndicate Showdown event with a -1% Bank Deposit Fee Reduction. When you couple this with that pretty sweet prize of an additional building upgrade, this has turned out to be a pretty good month. Some interesting prizes I have to say. I’ve already made use of the building upgrade and have the Chop Shop going as well as the new Killer Condo. I have a lot of Level 1 buildings out there, I need to get some cash out of them.

When totaled, I just passed the 50M attack mark. Nowhere the league of some others, but it’s nothing to sneeze at either. I’ve made some good progress lately, but it took a lot out of me to finish off the 100 wins against Violetta. I was getting a bit concerned I might run out of time.

Now that we have the new building upgrade prize, I wonder if there will be another building cost reduction prize. Haven’t seen one of those in forever. Probably asking too much.

image

image

image

Other articles of interest:

Leave a Reply

Your email address will not be published. Required fields are marked *

Recent Comments
  • Output status messages and test information by writing to the Log File Viewer in Katalon Studio (6)
    • Saranya: Good One. Could you plz share link to access all your katalon related blogs. ThankQ
    • Rodrigo Calabretta: I’m using the KeywordUtil.markFailed or KeywordUtil.markError and my test stops is being shown as Error and If I use in the @afterTestCase the testCaseContext.getTestCaseSta tus() to show the status test case...
  • Working with Dates and Date Formatting in Katalon Studio (14)
    • Don Pedro: That could be a little tricky. First, is the text/format always going to be the same? You will need to do some parsing. Separate the first but of text at 2019. After that, split the text again to get rid of Central Standard...
    • Don Pedro: It should be of the same Date type as today. You could then do some calendar trickery with Calendar /*Calendar c = Calendar.getInstance(); //c.set(Calendar.MONTH, 1) //Set the month, 0=January, 11=December println...
    • josh: I’m testing a page with a string like “Updated November 21, 2019 16:25:32 PM Central Standard Time.” How might I capture the date and time and compare it to current time to verify that the update time was within...
    • zakir hussain: today = new Date() lastWeek = (today – 1.week) can u please help me in understanding what is the return type of lastweek? and I wanted to set nextyear date how can i do it
    • ALLAN FORD: Useful !
    • Don Pedro: Not sure I understand what you are trying to do.
    • Don Pedro: formattedDate = mydate.format(“M/dd/yyy& #8221;)
  • Setting up Environment Profiles in Katalon Studio (2)
    • Don Pedro: Not quite sure I understand. The term “Execution Profile” is normally used now, but they are still GlobalVariables and are created in the same way for version 7 as previous. You make a new execution profile, then...
    • Aparna: Hello, Your documentation is excellent and has helped me understand many things. But this article above seems outdated and I need help in creating my own Global variables and all the documentation out there seems to be point to...
  • Here is my drive cluster (2)
    • Don Pedro: While I still have those drives, the drive cluster looks nothing like that now. Almost all of my external drives have had the cases removed and they have been installed into a series of MediaSonic 8 Bay Drive Enclosures. I...
    • Marin Boucher: Hi! Verry funny blog with “go to the point” on many post! I spent good time reading some of your post. Regarding this one about NAS, “many NAS” in fact, I would be curious to see a screenshot of...
  • How To Disable the Quicken Registration Prompt (27)
    • debra: didn’t work for me… my 2007 – which I am keeping on my older mac.
  • Adding entries to an open Excel spreadsheet during runtime (1)
    • IanG: Hi: Seems like nobody else has described (in detail) how Katalon can be configured to test an API by reading the first entry from a multi-row multi column XLSX spreadsheet, executing a test, writing the result to another column (or...