Snack Attack Limited Time Building (LTB) Payout and Upgrade Cost – Crime City

The new LTB the Snack Attack is out, but there appears to be a lack of information about. There are bits and pieces about the cost and payout, but nothing solid. With that in mind here is some preliminary information about the Payout and Upgrade costs. It’s a big building with an initial cost of $30 million, a payout of $195,313, every 12 hours. The prize at each level of completion is the Swell Slicer atk:20081 Def: 24542 +1% Mafia Defense. That should be affordable to most people and the weapon is pretty decent. However, don’t be fooled. You’re going to need gold to finish this one off and reach level 10. Gree, wouldn’t make it that easy for us.

Without any modifiers the total cost of the building will be around $7.5 Billion with an income of $5.5 million. That is a serious investment for cash for a pretty slight return. This is good to get your IPH started, but it’s not going to make you rich. That’s around $10 million per day if you catch both collection times.

If you have some modifiers it could be as low as $3.6 billion with a return of $7.9 million. Still, not bad, but after a couple levels you’re seriously losing money.

Lots of people are excited about the +1% Mafia Defense, which could certainly add up for some. Can’t say I’m all that thrilled over it.

Is it worth upgrading this building all the way? If you’re trying to squeeze out every percentage for your defense, then sure. If you’re building IPH at a low level, sure. If you’re building IPH at a high level, no.

Good luck! I’ll update these figures as I find them.

The information is based on figures I found at this link:

Level Cost Income Hours
1 $30,000,000 $195,313 24
2 $50,100,000 $390,626 30
3 $83,667,000 $683,596 36
4 $139,723,890 $1,074,222 42
5 $233,338,897 $1,562,504 48
6 $389,675,958 $2,148,443 54
7 $650,758,850 $2,832,039 60
8 $1,086,767,280 $3,613,291 66
9 $1,814,901,358 $4,492,199 72
10 $3,030,885,268 $5,859,390 78
Total $7,509,818,501.00    

Payout and Upgrade Costs with Modifiers

Level Payout +35% Upgrade -30% Upgrade -51%
1 $263,673    
2 $527,345 $35,070,000 $24,549,000
3 $922,855 $58,566,900 $40,996,830
4 $1,450,200 $97,806,723 $68,464,706
5 $2,109,380 $163,337,228 $114,336,060
6 $2,900,398 $272,773,171 $190,941,219
7 $3,823,253 $455,531,195 $318,871,837
8 $4,877,943 $760,737,096 $532,515,967
9 $6,064,469 $1,270,430,951 $889,301,665
10 $7,910,177 $2,121,619,688 $1,485,133,781
  Total $5,235,872,951 $3,665,111,065

Other articles of interest:

Leave a Reply

Your email address will not be published. Required fields are marked *

Recent Comments
  • Working with Dates and Date Formatting in Katalon Studio (15)
    • Sangeethaa: How to get previous day’s date(Yesterday’s date)? Actually I was using today.previous() before,it was working fine till today morning.Now its not retrieving right date. Can anyone please guide me on this.
    • Don Pedro: That could be a little tricky. First, is the text/format always going to be the same? You will need to do some parsing. Separate the first but of text at 2019. After that, split the text again to get rid of Central Standard...
    • Don Pedro: It should be of the same Date type as today. You could then do some calendar trickery with Calendar /*Calendar c = Calendar.getInstance(); //c.set(Calendar.MONTH, 1) //Set the month, 0=January, 11=December println...
    • josh: I’m testing a page with a string like “Updated November 21, 2019 16:25:32 PM Central Standard Time.” How might I capture the date and time and compare it to current time to verify that the update time was within...
    • zakir hussain: today = new Date() lastWeek = (today – 1.week) can u please help me in understanding what is the return type of lastweek? and I wanted to set nextyear date how can i do it
    • ALLAN FORD: Useful !
    • Don Pedro: Not sure I understand what you are trying to do.
  • Output status messages and test information by writing to the Log File Viewer in Katalon Studio (6)
    • Saranya: Good One. Could you plz share link to access all your katalon related blogs. ThankQ
    • Rodrigo Calabretta: I’m using the KeywordUtil.markFailed or KeywordUtil.markError and my test stops is being shown as Error and If I use in the @afterTestCase the testCaseContext.getTestCaseSta tus() to show the status test case...
  • Setting up Environment Profiles in Katalon Studio (2)
    • Don Pedro: Not quite sure I understand. The term “Execution Profile” is normally used now, but they are still GlobalVariables and are created in the same way for version 7 as previous. You make a new execution profile, then...
    • Aparna: Hello, Your documentation is excellent and has helped me understand many things. But this article above seems outdated and I need help in creating my own Global variables and all the documentation out there seems to be point to...
  • Here is my drive cluster (2)
    • Don Pedro: While I still have those drives, the drive cluster looks nothing like that now. Almost all of my external drives have had the cases removed and they have been installed into a series of MediaSonic 8 Bay Drive Enclosures. I...
    • Marin Boucher: Hi! Verry funny blog with “go to the point” on many post! I spent good time reading some of your post. Regarding this one about NAS, “many NAS” in fact, I would be curious to see a screenshot of...
  • How To Disable the Quicken Registration Prompt (27)
    • debra: didn’t work for me… my 2007 – which I am keeping on my older mac.
  • Adding entries to an open Excel spreadsheet during runtime (1)
    • IanG: Hi: Seems like nobody else has described (in detail) how Katalon can be configured to test an API by reading the first entry from a multi-row multi column XLSX spreadsheet, executing a test, writing the result to another column (or...