High Tech Hijinks and Tell No Tales Events – Crime City Limited Time Quest and New Building

The next two events are already underway! For this one we have yet another new building, the Transtech Building. The initial cost is $78 million and we get 20 days to upgrade it to Level 10. The initial payout is $613,000 in 1 day. It doesn’t sound too bad so far, but let’s see what the upgrade costs are going to be. If the first upgrade is $200 million, then this isn’t the building for me.

The Limited Time Quest is the Tell No Tales. It’s a 45 part event and if completed the prize is the Scorched Earth Chopper which has a 4650 Attack and 3100 Defense. Not a bad little prize. It’s all Energy based so it’s a good thing I stacked a lot of my points into that. I doubt seriously I will get to the end, but I should make a decent run at this one. I should have saved my energy from earlier today, but it’s early enough to not make too much of a negative impact.

Hopefully we’ll get the full list of items and the upgrade costs. Until then, Battle On!

Good Luck!

image image

Name: Transtech Building
Size: 8×8
Money Cost: $78,000,000
Payout: 24 Hours
Type: B
Unlock Level: 20
Event Length: 20 days
Start Date: 24/06/2013
End Date: 15/07/2013
Upgrade Cost and Time and Payout:

Lv —– Cost ——- Time — Payout
1 —— $78,000,000 ——- 24hr —– $613,000
2 —— $130,000,000 —— 30hr —– $
3 —— $215,000,000 —— 36hr —– $
4 —— $360,000,000 —— 42hr —– $
5 —— $600,000,000 —— 48hr —– $
6 —— $1,000,000,000 —- 54hr —– $
7 —— $1,600,000,000 —- 60hr —– $
8 —— $2,800,000,000 —- 66hr —– $
9 —— $4,700,000,000 —- 72hr —– $
10 —– $7,800,000,000 —- 78hr —– $

Weapon At Each Upgrade Completion:
Level 1:
Control, Alt, Delete
Level 2:
Code Crash
Level 3:
TS-50 Attack Pack
Level 4:
Titanium Knife
Level 5:
High Powered Rifle
Level 6:
Experimental Kevlar Armor
Level 7:
Hi Tech Pistol
Level 8:
TS-50 Explosive Device
Level 9:
Investor’s Ride
Level 10:
Bio Lock Rifle

Other articles of interest:

One Response to High Tech Hijinks and Tell No Tales Events – Crime City Limited Time Quest and New Building

  • Don Pedro says:

    With the Executive Coupe from the Street Brawl Tournament and the Evidence Destroyer from the Camera Case Event back in January I now have the 51% reduction in upgrade costs. I just upgraded the TransTech Building to Level 2 for $63 million instead of the normal $150 million. With the number of days left I might be able to upgrade to Level 5 on this thing. This also means I can upgrade the hell out of my Pagodas! People may be complaining about the Street Brawl, but it’s sure as hell working out for me!

Leave a Reply

Your email address will not be published. Required fields are marked *

Recent Comments
  • Enter dates into a date picker for Chrome and Firefox (1)
    • Prasanna: Hello, How to enter a previous month FIRST day and LAST day from the system date. Thanks Prasanna
  • How To Disable the Quicken Registration Prompt (31)
    • Juani: Hi, I have a registered Quicken 2016 and now my files are being held hostage by Intuit, cannot log in with my ID unless I upgrade therefore buy a subscription, I need to access my files, please HELP. Thanks
    • David: A BIG Thank you! I regularly reinstall Windows OS’s using different hardware configs. In short, Quicken 2011 (it’s March of 2020 as I write this) has been a program I’ve been very happy with and continue to use....
    • Karen L: Today I rang Reckon Australia again, got a different guy and he talked me through the process of getting me a new product key to enter since I already had the licence and it had been extended. Reckon have only extended it by 1...
    • Karen L: I have Australian Quicken 2008 on Windows 8.1. It keeps asking me to renew my licence which Reckon did for me however the activation won’t work. I tried this to disable the registration prompt however it did not stop the...
  • Building Relationships with Developers (1)
    • Carlos Herrera: Ah yes. I have a team of software developers and it is genuinely so hard to keep them in the loop during projects. Though the more we work the better the communication becomes and we go from a trail and error process to a...
  • Integrating DevonAgent Pro with Alfred (1)
    • J. Garr: Beautiful, sweet, and simple. I love it; thanks for posting this solution.
  • Round and Round with the For..Next in Katalon Studio (1)
    • Sweet Ophaline Labador: Hello can you help me how to loop this scenario. Checking the elements is just the same. I want to check that the following function is available in www.siacargo.com: Track Shipment – clicking on this can...
  • Parsing Strings in Katalon – Split, Substring and Readlines (6)
    • Don Pedro: String tempText=”Date Month January. Revenue $1,355,721.00″ println(tempText.split(“ \$”)[1]) You need to escape the $ with \$ The [1] on the split captures characters on the right of the split [0]...
    • Prasad: Hi, I need to get the substring from the below string ‘Date Month January. Revenue $1,355,721.00’ I want to extract text after $ value. Please help Thank you
  • Working with Dates and Date Formatting in Katalon Studio (15)
    • Sangeethaa: How to get previous day’s date(Yesterday’s date)? Actually I was using today.previous() before,it was working fine till today morning.Now its not retrieving right date. Can anyone please guide me on this.
    • Don Pedro: That could be a little tricky. First, is the text/format always going to be the same? You will need to do some parsing. Separate the first but of text at 2019. After that, split the text again to get rid of Central Standard...
    • Don Pedro: It should be of the same Date type as today. You could then do some calendar trickery with Calendar /*Calendar c = Calendar.getInstance(); //c.set(Calendar.MONTH, 1) //Set the month, 0=January, 11=December println...
  • Output status messages and test information by writing to the Log File Viewer in Katalon Studio (6)
    • Saranya: Good One. Could you plz share link to access all your katalon related blogs. ThankQ
    • Rodrigo Calabretta: I’m using the KeywordUtil.markFailed or KeywordUtil.markError and my test stops is being shown as Error and If I use in the @afterTestCase the testCaseContext.getTestCaseSta tus() to show the status test case...